Risk

Banking regulation

Read a bank's capital and liquidity like a supervisor: CET1 (Common Equity Tier 1) and buffers, risk weights and the output floor, leverage, LCR (liquidity coverage ratio) and NSFR (net stable funding ratio), the 3 pillars, AT1 (Additional Tier 1) and bail-in.

Read first: Market and credit risk

6 concepts6 min read25-question test, from a bank of 34Updated

Concept 1 of 61 min

CET1, the buffer stack and deductions

The rule
The CET1 ratio is CET1 ÷ risk-weighted assets, and Basel III requires a 4.5% minimum plus a 2.5% conservation buffer.
Worked examples

A CET1 ratio

Given
CET114
Risk-weighted assets125
  1. Ratio = 14 ÷ 125 = 11.2%

Ratios divide by risk-weighted assets, not total assets.

Stacking the requirement

Given
Minimum4.5%
Conservation buffer2.5%
Countercyclical0.5%
Systemic1%
  1. Total = 4.5% + 2.5% + 0.5% + 1% = 8.5%

8.5% before Pillar 2, and payouts are limited once a bank dips into its buffers.

Tangible capital

Given
Equity20
Goodwill3
Intangibles1
Risk-weighted assets160
  1. CET1 = 20 − 3 − 1 = 16
  2. Ratio = 16 ÷ 160 = 10%

Goodwill cannot absorb losses in a crisis, so it comes off capital.

The picture
Formula
CET1 ratio=CET1 ÷ RWA
requirement=4.5%+2.5%+countercyclical+systemic+Pillar 2
Why it holds

Countercyclical, systemic and Pillar 2 add-ons come on top, the countercyclical buffer being built in booms. Falling into the combined buffer restricts payouts, and goodwill is deducted from CET1.

Ratios use risk-weighted assets, not total assets. Global systemically important banks hold an extra buffer scaled to their size, interconnectedness and complexity, because their failure would threaten the system.

The maximum distributable amount rules limit dividends, bonuses and AT1 coupons until capital is rebuilt, which is why AT1 investors watch buffers; this is not failure, and resolution comes only when a bank is failing or likely to fail.

Goodwill cannot absorb losses in a crisis, so only tangible capital counts. Capital is not liquidity: a profitable lender with a sound CET1 ratio can still fail if depositors and funders take their money out faster than it can sell assets, as in the bank runs of 2023, or if hidden losses, such as unrealised losses on bonds, have to be realised.

Watch out
  • Dividing capital by total assets for the CET1 ratio.
  • Calling a breach of buffers a failure.
  • Counting goodwill as loss-absorbing capital.
In the interview
  1. How can a lender be profitable and still fail?

  2. A lender with a CET1 ratio of 12% has 200 billion of risk-weighted assets. A loss of 4 billion hits its capital. What is its new ratio?

  3. What is a CET1 ratio, and why do regulators focus on it?

  4. A bank's CET1 ratio is 10.2% against a requirement of 10%. What does that mean for its shareholders and bondholders?

    A complete answer covers

    • The bank is above its requirement but close to its buffers.
    • Any loss could push it into the buffer zone, where payouts are restricted.
    • Dividends and AT1 coupons are at risk; management may cut risk or raise capital.
    • The market will price that in its shares and AT1 bonds.

Also in our technical interviews, on camera, with a score.

Sources: Regulation (EU) No 575/2013 (CRR), art. 92; Directive 2013/36/EU (CRD), art. 129

Concept 2 of 61 min

Risk weights, internal models and the output floor

The rule
Under Basel, capital needed is risk weight × exposure × the required ratio, and mortgages weigh less than unsecured corporate loans because property secures them.

The why, the charts, the worked example and the interview questions are in Essentials, with every quiz.

See the plansSign in

Concept 3 of 61 min

Leverage ratio, LCR and NSFR

The rule
The leverage ratio is Tier 1 ÷ an exposure including off-balance-sheet items, at least 3%, ignoring risk weights.

The why, the charts, the worked example and the interview questions are in Essentials, with every quiz.

See the plansSign in

Concept 4 of 61 min

The 3 pillars, stress tests and FRTB

The rule
Basel's Pillar 1 sets minimum capital, Pillar 2 adds bank-specific requirements after supervisory review, and Pillar 3 requires public risk disclosure.

The why, the charts, the worked example and the interview questions are in Essentials, with every quiz.

See the plansSign in

Concept 5 of 61 min

AT1, bail-in, MREL and the limits that protect depositors

The rule
AT1 bonds convert or are written down when CET1 falls below their trigger, often 5.125%.

The why, the charts, the worked example and the interview questions are in Essentials, with every quiz.

See the plansSign in

Concept 6 of 61 min

AdvancedWhich capital rule binds: risk weights or leverage

The rule
A bank needs the larger of risk-weighted assets times its risk-based ratio and total exposure times the 3% leverage ratio.

The why, the charts, the worked example and the interview questions are in Essentials, with every quiz.

See the plansSign in

Recap

  • CET1 ratio = CET1 ÷ risk-weighted assets; 4.5% minimum + 2.5% conservation buffer, then countercyclical, systemic and Pillar 2 add-ons.
  • Capital needed = risk weight × exposure × ratio; internal-model RWAs cannot fall below 72.5% of the standardised result.
  • Leverage ratio = Tier 1 ÷ total exposure, at least 3%; LCR = liquid assets ÷ 30-day net outflows, at least 100%; NSFR funds long assets stably.
  • Pillar 1 minimums, Pillar 2 bank-specific add-ons, Pillar 3 disclosure; stress tests check capital after a severe scenario.
  • AT1 converts or is written down below its trigger, often 5.125% CET1; bail-in runs equity, AT1, Tier 2, senior; EU deposits are guaranteed to 100,000 euros.
Now test it

25 questions on Banking regulation

Timed, like the real one, drawn from a bank of 34. Every answer explained.

Test yourself →